-
April 20th, 2001, 05:28 AM
#1
Inactive Member
preludesc: my field unit loves my jrsc...
works great...and maybe he doesn't have a BTC....
btw - my BTC works good with my field unit too.
------------------
96 gsr hitting 12s
90 hybrid hatch hitting 14s
-
April 20th, 2001, 11:23 AM
#2
Inactive Member
yes its a fields unit,and i have j&s ultra,it did it before the j&s.
-
April 20th, 2001, 03:35 PM
#3
Inactive Member
i have a 00 civic ex(jrsc)when i set my vtec point on the controller at 5 or above rpms the controller freaks out when i hit vtec,the controller blinks off and on and the rev limiter is reset to whatever my vtec was suppose to be at,so instead of having a 7200rpm limiter its like 5rpms,i have the vtec harness also so i know the wires are right,everthing else works fine even when i set my vtec so i doesnt come on.
-
April 20th, 2001, 03:45 PM
#4
JASONS
Guest
sounds like crossed wires is it vafc or fields
-
April 20th, 2001, 03:45 PM
#5
Inactive Member
I had the same problem and called jr.if you are using field vtec controller, jr does not recommend that. Because vtec controller and timing knob (adjaster) hooked up to same ecu port. So, they cancel each other.
-
April 20th, 2001, 11:51 PM
#6
Inactive Member
Sounds like a wiring problem.
Tom
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks